Propane Tank Policies
The liquid petroleum or LP system style gas container is an OSHA term that refers to the piping, regulators, hoses, regulators, fittings and valves. The agency requires particular parts depending upon the capacity of the tank. These individual components have to undergo standard laboratory testing. The right laboratory approval shows that the system parts meet construction, pressure and thickness standards.
Tank Location
The organization OSHA determines how close the propane tank can be mounted in relation to ignitable materials, to buildings, to tanks which contain flammable liquids, welders and cutting torches. These stringent regulations are implemented to make the jobsite as safe as possible for the employees and those others who are in close proximity.
Nameplate Marks
Liquefied Propane systems need to be marked with the name and the address of the supplier of the container, or tank trade name. The container capacity is listed in gallons or pounds, square foot outside surface, pressure and fill level. Furthermore, information regarding whether or not the container is made for installation underground or above ground is also visible. These markings must be on a metal plate connected somewhere noticeable to the container. OSHA requires that each and every tank needs to be marked by the Pressure Vessel Inspectors and National Board of Boiler in order to be considered safe and ready to utilize.
Tank Repairs and Modifications
Any maintenance to LP systems which require welding are regulated by OSHA. Repair personnel and tank owners have to be familiar with standards and regulatory codes that the tanks were manufactured. Welding repairs to any system component which is subject to internal pressure has to first follow these fabrication codes. Other welding is just allowed on lugs, brackets or saddle plates.
OSHA has worked hard to make sure that individuals working with forklifts and individuals working nearby lift trucks are kept as safe as possible. They have strict training procedures and rules in place in order to make sure that these industrial machines and their repair processes are handled as safe as possible and with respect. It is very important that companies follow their rules and steep fines could happen if they are not adhered to.