Consider the Fast Charge Option
When it comes to recharging the forklift battery, there is an old rule of thumb which goes something like this: use the battery for a shift of roughly 8 hours, charge it for 8 hours and afterward let it cool and rest for another 8 hours. This formula has changed for many work operations that run more than one 8 hour shift. The fast charging choice has become an extremely popular alternative to traditional charging and ever since its development; lots of businesses have chosen to make the switch.
What Are the Advantages of Fast Charging?
Less Charging Time
Where the typical battery and charger was concerned, re-energizing a battery from a 20% state of charge up to a complete 100% charge used to take around 8 hours. Fast charging can now accomplish this same charging in around an hour to an hour and 30 minutes! A lot of companies utilize scheduled lunch and break times to accomplish this vital task.
Easier Refills
The fast charge batteries will normally require a single-point watering system. This system means that users do not require removing the battery from the lift truck in order to water it.
Temperature-Sensitive Design
There is a thermistor located near the center cell on every new fast charge battery that helps it to monitor temperature. The charge rate is reduced and may occasionally stop once the temperatures get to a specific level. This is important so that the battery does not overheat. This method can unfortunately result in an undercharged battery. There are several specific fast charge brands of batteries which use extra thick posts, copper inserts and inter-cell connectors so as to increase conductivity and decrease heat generation due to the higher current. These features help to allow the battery to accept a higher charge rate for a longer time period.
The overall productivity of these machinery has been significantly better ever since the development of the fast charge battery system. Before, companies used to require more than one machinery when they were operating around the clock; nowadays they can save much money and utilize one forklift twice as much in a day with by using the fast charging batteries.